當前位置：上海榮計達儀器科技有限公司>>砌墻磚檢測儀器>>榮計達單磚原位雙剪儀

榮計達單磚原位雙剪儀

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號DYE-75

品牌

廠商性質其他

所在地上海市

在線詢價 收藏產品查看聯系電話

紡織服裝機械網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2023-10-14 14:05:14瀏覽次數：75次

聯系我時，請告知來自紡織服裝機械網

產品分類 品牌分類

  砌墻磚檢測儀器

全部產品列表

暫無信息

上海榮計達儀器科技有限公司

經營模式：其他

商鋪產品：1006條

所在地區：

聯系人：王林

詢價 給他留言

產品簡介

單磚原位雙剪儀是檢測儀器，用于檢測建筑砌體抗剪強度的專用儀器。使用前務必仔細閱讀說明書。并由專業實驗人員操作，以避免操作不當引起的傷害。如需了解更多資料請與我公司客服人員聯系。

詳細介紹

單磚原位雙剪儀是**檢測儀器，用于檢測建筑砌體抗剪強度的專用儀器。使用前務必仔細閱讀說明書。并由**實驗人員操作，以避免操作不當引起的傷害。如需了解更多資料請與我公司客服人員聯系。

Single brick in situ double shear device is a special testing instrument for testing the shear strength of building masonry. Be sure to read the instructions carefully before use. It is operated by ** experimental personnel to avoid injury caused by improper operation. For more information, please contact our customer service staff.

單磚原位雙剪儀是一臺小型液壓裝置，通過活塞上升推動蓋板對砌塊產生作用力檢測砌體抗剪強度，使砌塊上下兩個面發生剪切，通過測定砌塊發生剪切時的力來計算砌體的抗剪強度，測試結果直觀性強，檢測部位局部破損。由上海榮計達儀器科技有限公司提供，設備質保期一年，一年內產品如有質量問題，供方負責免費維修。如果因操作不當或者人為損壞，我公司亦應提供維修、更換服務，由此產生的費用我公司會酌情收取。

The single brick in-situ double shear device is a small hydraulic device that detects the shear strength of the masonry by pushing the cover plate to push the cover to exert force on the masonry. The cutting force is used to calculate the shear strength of the masonry. The test results are intuitive and the detection site is partially damaged. Provided by Shanghai Rongjida Instrument Technology Co., Ltd., the equipment warranty period is one year. If the product has quality problems within one year, the supplier is responsible for free maintenance. If due to improper operation or man-made damage, our company should also provide repair and replacement services, and the costs incurred by our company will be charged as appropriate.

單磚原位雙剪儀特點：

1.該儀器結構新穎，體積小巧，質量輕盈，操作方便。

2.采用手動泵加荷油缸，操作簡單方便，互換性強。

3.數字顯示壓力表，可直接讀出剪切力。

Features of single brick in situ double shear

1. The instrument has a novel structure, small size, light weight and easy operation.

2. The manual pump is used to load the oil cylinder, the operation is simple and convenient, and the interchangeability is strong.

3. Digital display pressure gauge can directly read the shearing force.

單磚原位雙剪儀主要技術參數：

■額定推力（Kn）:75

■額定行程（mm）:20-25

■相對測量范圍（%）:20-80

■示值相對誤差（%）:±2

■外形尺寸（mm）:115×65×110

■質量（Kg）: 8

Main technical parameters of single brick in situ double shear device

■ Rated thrust (Kn): 75

■ Rated travel (mm): 20-25

■ Relative measurement range (%): 20-80

■ Relative error of displayed value (%): ± 2

■ Dimensions (mm): 115 × 65 × 110

■ Quality (Kg): 8

單磚原位雙剪儀操作方法：

■所示，**先將砌塊相鄰一端的另一砌塊掏出，清除四周的灰縫，制備出安放主機的孔洞。其截面尺寸不得小于115mmX65mm，然后掏空并清除砌塊另一端的豎縫。

■砌塊兩端的灰縫應清理干凈。開鑿清理過程中，嚴謹擾動砌塊;如發現砌塊有明顯缺棱掉角或上下灰縫有明顯松動現象時，應舍棄該砌塊。被推砌塊的承壓面應平整，否則應用變砂輪等工具磨平。

■將雙剪儀主機放入開鑿好的孔洞中，使儀器的蓋板與砌塊的頂面重合，儀器軸線與砌塊軸線吻合，若開鑿孔洞過長，應在儀器尾部另加墊塊。

■壓動手動泵，使雙剪儀對砌塊均勻施加水平載荷，直至砌塊和砌體之間相對位移，砌塊達到破壞狀態。加荷的全過程宜為1-3min。

■記錄砌塊破壞時數字壓力表的讀數。根據此讀數可計算出灰縫面的抗剪強度。

Single brick in situ double shear instrument operation method

■ As shown, ** first pull out the other block adjacent to the block, remove the gray seams around it, and prepare a hole for the host. Its cross-sectional dimension should not be less than 115mmX65mm, and then hollow out and remove the vertical seam at the other end of the block.

■ The gray joints at both ends of the block should be cleaned up. During the excavation and cleaning process, the block is disturbed rigorously; if it is found that the block has obvious edges and corners or the upper and lower gray joints have obvious loosening, the block should be discarded. The pressure-bearing surface of the pushed block should be flat, otherwise it should be smoothed by tools such as variable grinding wheels.

■ Put the main body of the double-scissor instrument into the excavated hole, so that the cover plate of the instrument coincides with the top surface of the block, and the axis of the instrument coincides with the axis of the block. If the excavated hole is too long, another block should be added at the end of the instrument.

■ Press the manual pump to make the double shear device apply the horizontal load evenly to the block until the block and the block are displaced relative to each other, and the block reaches the damaged state. The whole process of loading should be 1-3min.

■ Record the digital pressure gauge reading when the block is broken. Based on this reading, the shear strength of the gray seam surface can be calculated.